• Корпоративный Новый год
  • Организация выпускных
  • Студия вокала
  • Организация свадеб
  • Программы для диджеев
  • Организация корпоративов
  • Написания музыки
  • Вокала
  • Дни рождения
  • Новости

    How to find a hard disk in BIOS. How to install a hard disk in the BIOS. Activating a previously disabled disk

    1. Activating a previously disabled disk
    2. You will need
    3. Turn on hard disk check
    4. Before you start
    5. We are entering BIOS
    6. Turn on hard disk check
    7. Total

    When you connect to computer hard the disk, it may happen that it is not displayed in “My Computer” and is even missing in the “Device Manager”. Then the first thing to do is to see if HDD computer bios. If the BIOS hard drive is still determined, then the system recognized it. In such cases, the hard disk will just need to manually connect already in the system itself.

    If you put your finger on the touchpad and press harder, it will cause a mouse click. Clicking on the right edge of the touchpad corresponds to a right-click. No, batteries are not interchangeable. Here is a screenshot of the folder window with the corresponding disks and free capacity.

    Activating a previously disabled disk

    There is no service door at the bottom of the case. Appendix: dismantling the main unit along with the extension hard drive described in the article. It works very well. Further issues are addressed in the following related articles. Some users skip the advertised pen that is well hidden. On the base unit there is a hole in the front left corner into which the stylus is inserted.

    You will need

    • - Computer with Windows.


  • Turn on the computer and immediately after that press the Del button on the keyboard. This will take you to the BIOS menu, in which you select the Main menu. It contains information about all the main devices connected to the motherboard.
  • It is necessary to search for a hard disk in BIOS depending on the connection interface it is equipped with. If your hard disk is equipped with an IDE interface, then you need to look for it in the Primary IDE Master and Secondary IDE Master sections. If the system sees a hard disk, then opposite the line displays information about the hard disk model, the manufacturer and capacity of the hard drive. Selecting this section and pressing Enter, you will see more information about the hard disk. If the system does not see the connected hard drive, then the opposite will be the inscription Not detected.
  • If you have a hard disk with an interface SATA connections , it means to search, accordingly, you need opposite SATA points. For example, you connected the hard drive to the second SATA connector on the system board . Therefore, information about it must be opposite the SATA 2 item. To view Additional information , you also need to select this section and press Enter. As in the previous case, if the system does not recognize the connected device, you will see the inscription Not detected.
  • The system must recognize hard drives immediately after their connection. If you have connected a hard disk, and the BIOS system does not see it, there may be several reasons. Probably, the connection loop is leaving. Then you need to check everything and reconnect. It may also be that the connection loop has failed, so you need to try another one. It may also happen that you forgot to connect power to the hard drive. Do not exclude breakdowns of the connection interface on the system board itself. It is worth trying to connect the hard drive to another interface. The surest way to check your hard drive for good health is to connect it to another computer.
  • Rate this article!

    Hard drive is not the most reliable part. personal computer and at the most inopportune moment this device can fail. To prevent this, the HDD requires constant analysis of its performance and checking the data recorded on it for integrity. As a rule, specialists are engaged in this, which means several things: they will definitely take money from you for this and you will have to say goodbye for some time. However, we have a small secret for you, using which you can easily check the status of your hard disk on your PC. This secret is hidden in the system BIOS.

    Turn on hard disk check

    The device comes with printed leaflets and a booklet with a user manual. If necessary, you can also download drivers through the multimedia support page. On some computers, keystroke time is rather short. You need to press a key with one hand and start the computer with the other hand.

    Restart with keystroke capital. On the first graph, click "Troubleshooting." In the next click on the "Advanced Options" opens the following image. Four items have been added to the boot menu, viz. Let's say you have to turn off Safe Boot, i.e. to "disabled".

    Today we look at:

    Before you start

    Before you begin to explain to you how to check the hard disk with BIOS for performance, you should understand a few things:

    • this method will not work with SSD solid state drives;
    • depending on the BIOS versions , the names of its menu items and their location may differ significantly (or not significantly).

    Actually, that's all. Now let's go into BIOS and figure out how to diagnose HDD with it.

    Here you will go to “Disabled” and press the “Enter” key. As a rule, the menu is called “Download”, but “Security” or “Authentication” or “System Configuration” are also possible. Reduce after disabling secure boot. Safe mode downloads.

    When secure boot disabled, the selection expands. In the third case, a query appears. Pay attention to the level of creativity of this image. We need to change the bootloader so that it allows us to choose between several operating systems. In the following figure, these three cases are best explained.

    We are entering BIOS

    We have already spoken about the BIOS environment, its varieties and settings, and for this we have highlighted the whole article. In the same place, in one of the points we told how to enter the BIOS. Navigate and review the BIOS Login section so we can continue on.

    Turn on hard disk check

    So you are inside. Next, be extremely careful, as the items that will now be called in this article, you may look and be placed very differently. Using the keyboard arrows to navigate, go to the Diagnostics section, then select Primary Hard Disk Self Test . Provided that your computer uses more than one “hard drive,” the system will prompt you to select the available disk for the scan.

    It will take some time for the system to check the hard drive for bad sectors. However, upon completion of this process, you will easily understand whether there is damage on your hard disk:

    • if an unsuccessful attempt to test, your hard drive is damaged and requires repair or replacement;
    • if the test was performed at 100% - everything is fine with the HDD, and all minor hard disk errors will be corrected by the system.


    Using BIOS as a tool for checking bad sectors on a hard drive, you can quickly diagnose the health of a hard disk on a computer. Of course, the problem is there, namely, the visual difference different versions BIOS, as a result, it is sometimes quite difficult to find one or another item, following some example. Despite this, this method is very good, and everyone should know about it.

    This battery is also responsible for keeping the battery and system current. Some applications that we can run when setting up. It is not recommended to make any changes in this part, if you do not have much knowledge in this area. 4 - Power management settings - in this part you will find all the parameters related to power saving modes. Options such as turning off the monitor, hard drive, standby, etc.

    This documentation has been archived and is not updated. We recommend that you first use the steps in this guide in a test lab environment. This is not visible to the user, and the user login has not changed. These steps are for testing purposes only.


    © 2009 Broadway 21 Records
    Все права сохранены.